If you’ve worked with commercial doors or specified hardware for large building projects, chances are you’ve come...
Read moreZoo DIN Bathroom Lock Case is a DIN standard bathroom lock.
A DIN lock is a type of lock that conforms to DIN standards—a set of German engineering specifications established by the Deutsches Institut für Normung (DIN). These standards ensure uniformity in size and fitting, making DIN mortice locks compatible across a wide range of doors and hardware.
Product Features
- Available in 55mm or 60mm backset
- Stainless Steel single fixed forend, 22mm width
- Stainless Steel easily reversible latchbolt
- Stainless Steel double throw dead bolt, 20mm
- 8mm bathroom follower with optional supplied 5mm adaptor
- Anti-rattle strike
- Grip tight follower
- 0.8mm (30 min) and 1mm (60 min) Graphite intumescent kit for use on fire rated doors supplied separately (see below table for details)
Performance Testing
Successfully tested in accordance with the requirements of BS EN12209: 2003
3 X 8 1 0 G - B G 2 0
Fire Testing
Successfully fire tested in accordance with the requirements of BS EN1634-1, suitable for use on timber fire doors up to 120 minutes and steel fire doors up to 240 minutes.
Certfication
- CE marked (Certificate AG10266)
- UKCA marked (Certificate AG10315)
- CERTIFIRE approved (Certificate CF10194)
Latch reversal procedure - For this product the latch reversal process is fairly unique and simple. Turn the lock case upside down and you should notice the small metal 'blocking arm' behind the latch falls out of the way. Once gravity has pulled this small arm clear, you should be able to push the latch bolt fully in to the aperture behind it and the cut outs in the side of the case should allow you to rotate the latch bolt 180 degrees and then release it back to its normal position.
