Panic and Emergency Exit Hardware
Panic & Emergency Exit Hardware – Trade Supply from Duffells
Duffells stocks a comprehensive trade range of panic hardware and emergency exit devices for commercial, public, and industrial buildings. From single-door panic bars and push pads to outside access devices and escape bolts, our range meets the requirements of BS EN 1125 (panic hardware) and BS EN 179 (emergency exit hardware) for safe and compliant emergency egress installations.
Single Door Panic Bars
Our single door panic bars are the most widely specified emergency exit device for doors requiring panic hardware to BS EN 1125. The crossbar design allows the door to be opened by applying pressure anywhere along its full width — essential for high-occupancy environments such as schools, offices, and public buildings. We stock products from Briton, Exidor, and Legge.
Push Pads & Paddle Handles
Our push pads and paddle handles are certified to BS EN 179 for emergency exit applications where a panic device is not required but controlled egress must still be maintained. Ideal for staff exits, service doors, and secondary exits in lower-occupancy areas
Outside Access Devices
Where re-entry through an emergency exit door is required, our outside access devices allow the door to be operated from the outside using a key, lever handle, or thumb turn, while maintaining full panic release from the inside. Browse our outside access device range for compatible options.
Egress & Escape Locks
Our escape bolts provide a simple, robust egress solution for single and double doors, securing the door in the closed position while allowing immediate release in an emergency. Available in rod and flat bar configurations for a variety of door types.
Egress & Escape Locks
For fire escape routes requiring a certified mortice lock, we supply a range of escape mortice locks and egress mortice locks designed to meet the requirements of Building Regulations Approved Document B and BS 8621.
Fire Rated Panic Hardware
Panic hardware fitted to fire doors must carry appropriate fire certification in addition to BS EN 1125 or BS EN 179 approval. Our fire rated panic hardware options are tested for use in fire door assemblies and should be used alongside fire rated door closers and fire rated door furniture for fully compliant fire door sets.
Why Trade Customers Choose Duffells
Specifying and installing panic hardware carries significant compliance obligations. Duffells' trade team understands the relevant standards and can advise on the correct product for your application, ensuring installations meet Building Regulations, insurance requirements, and fire safety legislation.
Frequently Asked Questions
What is the difference between BS EN 1125 and BS EN 179?
BS EN 1125 covers panic hardware for doors on escape routes in buildings used by the public — the device must be operable by pressure on a crossbar. BS EN 179 covers emergency exit hardware for buildings used by informed occupants (such as staff) — a lever handle or push pad is acceptable. The correct standard depends on the occupancy type and risk assessment for the building.
Does panic hardware need to be fire certified?
Yes, if it is to be fitted to a fire door. The device must carry both BS EN 1125 or BS EN 179 certification and fire door certification. Using non-fire-certified hardware on a fire door will invalidate the door's fire rating.
Can panic hardware be used on both single and double doors?
Yes. We stock both single and double door configurations. Double door sets require coordinated pairs with an astragal or rebate arrangement. Contact our trade team to discuss double door panic hardware requirements.
What outside access options are available for panic exit doors?
Options include lever handle outside access, thumb turn outside access, and key-operated outside access. The choice depends on who needs access from outside and what level of security is required. See our outside access devices range for full details.
