Konig spray lacquer is an opaque spray that is designed for use on PVCu and composite windows and doors. Offering a high level of opacity, these sprays can be used for repairs or to colour-match hardware and accessories.

Touch dry in less than 60 seconds, these spray lacquers are available in a wide range of colours, including Anthracite Grey, Rosewood Brown, Black Brown, Chartwell Green, Golden Oak, Agate Grey, Cream UPVC, Irish Oak, Foiled White and Slate Grey. Please select the colour you require from the options on the right or the table, below.

This spray lacquer has a low sheen, matt finish, that matches perfectly with existing PVCu and composite finishes. No primer or top coat is required, it is UV stable and water resistant, so it can be used inside or outside.

These sprays are often used at the end of a repair using melted wax (see our part KMELTKIT) as a final step to give a perfect finish. Alternatively, they can be used to paint door and window hardware to match an existing installation. For example, if the client requires an anthracite grey trickle vent, sash jammer or window stay, these sprays can be used to paint existing products to match the window or door colour.

The Konig range of repair products offers the double glazing repairer, locksmith or other property professional the opportunity to repair any small imperfections to a customer's door or window when replacing a broken lock, upgrading hardware or gaining entry. They offer the unique opportunity to upsell an additional service when already on site, or to provide an additional service to genuinely impress the customer.

Often, when a security professional attends a client's property, they will end up leaving the client in the same position as they were in before the lock failure or lockout. The client is pleased that they are safe and secure, but their property will often look the same as it did before. While the security device will be new, the client may see no visible difference. Konig repair products allow you to leave the property visually improved by repairing any defects in the door or window.

Operation

Shake the can for at least 60 seconds to mix the paint. Wait for the ball bearing to rattle inside the can.
Test a small area to ensure that the spray is flowing effectively.
Spray the desired area lightly, using back and forward strokes from at least 500mm from the target.
Light strokes are better to avoid the risk of running paint.
Wait a few minutes for the surface to dry.
Once the job is complete, turn the can upside down and spray to clear the tube. This will ensure that your can be used again and again without clogging.

Please note Duffells operates a strict policy where we only sell products to account holders. These products cannot be sold to customers under the age of 18 and cannot be shipped to Ireland or the Channel Islands because of courier restrictions.

Door & Window Repair Kits