Please select a wishlist

Winkhaus AV2 Motor

Winkhaus AV2 Motor
Order code: 2409926
RRP Please log in to view prices
Log in to view prices and stock availability

The Winkhaus AV2 motor is compatible with all Winkhaus AV2 and AV3 automatic multipoint locks, to create an electronic locking device for use with access control systems.  

The AV2 and AV3 range of Autolocking mechanisms have the optional capability of becoming an electronic access controlled locking system. The lock is designed to accept this “screw-on” 12v electronic motor which can then be controlled by a range of access control systems. Please note that the machine screws which secure the motor to the faceplate feature reverse threads and must be turned anti-clockwise to tighten them.

The AV2 connecting cable is not included and must be bought separately, see related products.

Please note: Due to its nature this item is sealed with a tamper-evident security seal. Please confirm the item matches the description on the invoice, and is needed, before breaking this seal. Once this seal has been broken, or the item has been removed from its packaging, it is considered to be used cannot be returned unless it becomes faulty. Returns for faulty items will be handled in accordance with the relevant manufacturers' returns procedures.

  • Motor: 12v DC (a stabilised supply with at least 2 Amps available should be used)
  • Packaging: Supplied Boxed
  • Supplied with fixing screws (reverse thread)
  • Cable and accessories supplied seperately
  • Full metal construction

How can I tell who the manufacturer is of my multipoint lock?

Check down the faceplate and look for a brand name or logo to identify the manufacturer.

How do I find out the operation of my multipoint door lock?

  • 1. If you only use the key to unlock all of the locking points then the operation is called Key Wind.
  • 2. If you lift the handle and turn the key to lock then the operation is called Lift Lever.
  • 3. If from the outside you unlock with the key, pull handle down to disengage the locking points and turn the key to open the door then this operation is called Nightlatch or Split Spindle.
  • 4. If lifting the handle fully locks the door without the use of a key then this operation is called Auto Locking.

How do I measure my multipoint door lock?

Always measure in millimetres.

  • 1. Backset – Measure the distance from the edge of the faceplate back to where the key goes into the door cylinder.
  • 2. Centres – Measure the distance from centre of handle spindle down to where the key goes into the door cylinder.
  • 3. Locking points – Measure the distance from centre of the locking point to the centre of handle spindle then repeat for other locking points.
  • 4. Faceplate – Measure the distance across the width of the face and full length of the faceplate.
  • 5. Gearbox – Measure the height and depth of the gearbox.

How do I know if my multipoint door lock is left or right handed?

99% of multipoint door locks are field reversible, instructions for which are under product information. For those models which are handed please refer to the handing chart to determine which hand you require.