Please select a wishlist

Winkhaus AV2 + Latch Deadbolt 2 Hooks Flat 16mm Faceplate Autolocking Multipoint Door Lock

Winkhaus AV2 + Latch Deadbolt 2 Hooks Flat 16mm Faceplate Autolocking Multipoint Door Lock
Log in to view prices and stock availability

Hooks on this lock are automatically engaged as the door is closed without needing to lift the handle. The handle will retract the hooks from the inside and a further turn of the key deadlocks the door.

To transform this multipoint lock into an electronic locking solution, simply attach the 12V DC Winkhaus AV2 motor (available separately) and connect using the Winkhaus AV2 cable to the wide range of Winkhaus access control products available.

Backset: 35mm 45mm or 55mm.

Centres: 92mm.

Operation: Automatic Locking.

Latch Reversal: Handed - Non Reversible See Attached Handing Chart.

Handing Charts

Standing outside looking at the door

Standing Outside, Door Hinged Door Opens Handing
Left Inward Right
Left Outward Left
Right Inward Right
Right Outward Left

 

Standing inside looking at the door

Standing Inside, Door Hinged Door Opens Handing
Right Inward Right
Right Outward Left
Left Inward Right
Left Outward Left

 

  • Centres: 92mm.
  • Case height: 185mm.
  • Case depth: Backset + 18mm.
  • Overall length: 2100mm.
  • Motor Power: 12V DC.
  • Distance between hooks: 1490mm.

How can I tell who the manufacturer is of my multipoint lock?

Check down the faceplate and look for a brand name or logo to identify the manufacturer.


How do I find out the operation of my multipoint door lock?

  • 1. If you only use the key to unlock all of the locking points then the operation is called Key Wind.
  • 2. If you lift the handle and turn the key to lock then the operation is called Lift Lever.
  • 3. If from the outside you unlock with the key, pull handle down to disengage the locking points and turn the key to open the door then this operation is called Nightlatch or Split Spindle.
  • 4. If lifting the handle fully locks the door without the use of a key then this operation is called Auto Locking.


How do I measure my multipoint door lock?

Always measure in millimetres.

  • 1. Backset – Measure the distance from the edge of the faceplate back to where the key goes into the door cylinder.
  • 2. Centres – Measure the distance from centre of handle spindle down to where the key goes into the door cylinder.
  • 3. Locking points – Measure the distance from centre of the locking point to the centre of handle spindle then repeat for other locking points.
  • 4. Faceplate – Measure the distance across the width of the face and full length of the faceplate.
  • 5. Gearbox – Measure the height and depth of the gearbox.


How do I know if my multipoint door lock is left or right handed?

99% of multipoint door locks are field reversible, instructions for which are under product information. For those models which are handed please refer to the handing chart to determine which hand you require.


Do you have a gearbox for this multipoint lock?

Yes our part numbers are WINKAV2CASE35LH, WINKAV2CASE35RH, WINKAV2CASE45LH, WINKAV2CASE45RH, WINKAV2CASE55LH and WINKAV2CASE55RH.

All product options

All product options
Product Code Backset Handing StockRRPDiscountPriceQuantity
2352131
35mm
Left Hand
---
--,--
--
2352122
35mm
Right Hand
---
--,--
--
2352157
45mm
Right Hand
---
--,--
--
2352165
45mm
Left Hand
---
--,--
--
2352181
55mm
Left Hand
---
--,--
--
2352173
55mm
Right Hand
---
--,--
--