This Mila gearbox has a latch only and available with 25mm, 28mm, 35mm and 45mm backsets and has 92mm centres and an 8mm single spindle.
Operation: Lift lever
Latch reversal: Undo the screw in the side of the lock case to remove the latch, reverse, reinsert and replace the screw. M4 x 10mm self tapping machine screws need to be used with this lock as screw holes are unthreaded. Mila centre case with no deadbolt, self tapping screws are required (not supplied)
- H x W: 233mm x Backset + 20mm.
- Centres: 92mm.
- Spindle: Single 8mm.
- Packaging: Supplied loose in singles