Please select a wishlist

Hooply Genuine Multipoint Gearbox - Key Wind

Hooply Genuine Multipoint Gearbox - Key Wind
Order code: HOO001
RRP Please log in to view prices
Log in to view prices and stock availability

The Hooply multipoint gearbox has Faceplate dimensions of 240mm x 24mm, Centers of 68mm, and a Backset of 60mm. This lock case has Fingerbolts - see HOO002 for the standard deadbolt version. It's commonly used on site containers and security steel doors.

Operation: Key Wind

Latch reversal: Depending on the date of manufacture either:

1. To reverse the latch, undo the screw on top of the lock case and push the silver button up and the latch should pop out. Twist and reinsert the screw.

2. Using a screwdriver or similar insert into the round hole in the back edge of the lock case behind the latch. Push the entire latch bolt forward until the bolt clears the faceplate and can be rotated. Spin the bolt through 180 degrees. remove the screwdriver from the back of the case and the bolt will move back into position.

 

To lock the door

1. Lift the handle upwards to engage the locking points.

2. Lock the locking points and main deadbolt (if present) by turning the key.

To unlock the door

1. Unlock the system by turning the key.

2. Push the handle downwards to disengage the locking points and retract the latch.

Is this a genuine gearbox or a copy?

Yes this is a genuine gearbox,as far as we are aware there is no copy version available.


The top and bottom extensions on my lock are broken ,do you sell these?

No but they are available as a special order.