Please select a wishlist

Fullex Crimebeater Genuine Multipoint Gearbox - Lift Lever or Double Spindle

Fullex Crimebeater Genuine Multipoint Gearbox - Lift Lever or Double Spindle
Log in to view prices and stock availability

Fullex Crimebeater gearboxes are available in 35mm, 45mm and 55mm backsets in double spindle configuration only, allowing them to be used as lift lever or double spindle night latch lock.

Crimebeater gearboxes measure 227mm high by the backset + 15mm. These gearboxes attach to their strips with three equidistant screws. The middle screw is 108mm from the top, which is also 108mm from the bottom screw.

These gearboxes all feature a deadbolt and latch. The latch is 24mm high, the deadbolt is 30mm high and the distance from the bottom of the latch to the top of the deadbolt is 72mm.

Note that the latest version has a small rectangular raised area just above the cylinder cut-out, this is to prevent manipulation of the lock gate if the handles are removed, if the new case will not go back in then enlarge the hole to allow entry.

Also suits the Automatic lock.

Operation: Lift lever or double spindle

Latch reversal: Undo the screw in the latch to remove. Reverse, reinsert and replace the screw

  • Manufacturer: Fullex
  • Backset: 35mm, 45mm or 55mm - How do I measure the backset?
  • Centres PZ: 92mm/62mm - How do I measure the centres?
  • Case Height: 230mm
  • Case Width: Backset + 15mm
  • Copy/Genuine: Genuine
  • Cylinder Type: Euro
  • Handing: Not Handed
  • Main Gearbox: Latch & deadbolt
  • Spindle: Double 8mm
  • Operation: Lift Lever or Double Spindle Nightlatch - What is the operation?
  • Packaging: Supplied in singles

Is this a genuine gearbox or a copy?

Yes this is a genuine gearbox,as far as we are aware there is no copy version available.


I have a Fullex lock but it doesn’t look like this, do you have other types?

Yes there are several variations of Fullex gearboxes available.

_______________________________________________________

Why does the latest model have rectangular shaped protuding part above the cylinder?

This is to prevent the lock gate being manipulated if the handles are removed. If it prevents the lock case going into the gap then enlarge the opening slightly will allow access.


All product options

All product options
Product Code Backset Spindle Centres PZ StockRRPDiscountPriceQuantity
CRBCASE35
35mm
Double 8mm
92mm/62mm
---
--,--
--
CRBCASE45
45mm
Double 8mm
92mm/62mm
---
--,--
--
CRBCASE55
55mm
Double 8mm
92mm/62mm
---
--,--
--