Please select a wishlist

AGB Latch Deadbolt 2 Hooks 3 Rollers Lift Lever Multipoint Door Lock (top hook to spindle = 580mm)

AGB Latch Deadbolt 2 Hooks 3 Rollers Lift Lever Multipoint Door Lock (top hook to spindle = 580mm)
Notify me when this product is in stock
or call us on 020 8662 4010


Alternative products available

AGB2H3R30 See Alternative

AGB2H3R35 See Alternative

This part is discontinued and is no longer available.

However, part: V-MPL30 is a potential alternative for part: AGB2H3R30, and part: V-MPLSS35 is a potential alternative for part: AGB2H3R35.

We'd recommend a VERSA V-MPL to replace this lock. There isn't a full lock that is a direct swap, but the VERSA lock comes with keeps and is adjustable to suit the original door routing.

AGB locks are manufactured in Italy. They were historically available in a number of different configurations but only the Poseidon lock is still available. The AGB Poseidon lock features a unique hook and deadbolt arrangement on the outer locking points. Designed to look like a trident, each hook is thrown in the opposite direction to the other with a deadbolt separating them.

AGB UPVC door locks are easy to identify from the logo stamped on the faceplate or the unique Poseidon locking arrangement. These locks are only available with a 35mm backset and a 16mm faceplate. The operation is lift lever with a single spindle.

Operation: Lift Lever

To lock the door

1. Lift the handle upwards to engage the locking points.

2. Lock the locking points and main deadbolt (if present) by turning the key.

To unlock the door

1. Unlock the system by turning the key.

2. Push the handle downwards to disengage the locking points and retract the latch.

We stock a range of associated products for AGB multipoint door locks, including keeps, spindles, handles and accessories.

You may find this lock used as a UPVC door lock or an aluminium door lock.

  • Manufacturer: AGB
  • Backset: Select from drop-down - How do I measure the backset?
  • Centres PZ: 92mm - How do I measure the centres?
  • Faceplate: Select from drop-down - How do I measure the faceplate?
  • Spindle Size: 8mm
  • Rollers: 3
  • Hooks: 2
  • Deadbolts: 1
  • Latch: 1
  • Main Gearbox: Latch & deadbolt
  • Operation: Select from drop-down - What is the operation?
  • Spindle: Single 8mm
  • Handing: Non handed
  • Distance Between Inner Locking: 1070mm
  • Distance Between Outer Locking: 1460mm
  • Height: 2190mm
  • Top Hook to Spindle: 580mm
  • Bottom Hook to Spindle: 680mm
  • Top Roller to Spindle: 680mm
  • Bottom Roller to Spindle: 780mm
  • Door Material: UPVC, Aluminium

How can I tell who the manufacturer is of my multipoint lock?

Check down the faceplate and look for a brand name or logo to identify the manufacturer.


How do I find out the operation of my multipoint door lock?

  • 1. If you only use the key to unlock all of the locking points then the operation is called Key Wind.
  • 2. If you lift the handle and turn the key to lock then the operation is called Lift Lever.
  • 3. If from the outside you unlock with the key, pull handle down to disengage the locking points and turn the key to open the door then this operation is called Nightlatch or Split Spindle.
  • 4. If lifting the handle fully locks the door without the use of a key then this operation is called Auto Locking.


How do I measure my multipoint door lock?

Always measure in millimetres.

  • 1. Backset – Measure the distance from the edge of the faceplate back to where the key goes into the door cylinder.
  • 2. Centres – Measure the distance from centre of handle spindle down to where the key goes into the door cylinder.
  • 3. Locking points – Measure the distance from centre of the locking point to the centre of handle spindle then repeat for other locking points.
  • 4. Faceplate – Measure the distance across the width of the face and full length of the faceplate.
  • 5. Gearbox – Measure the height and depth of the gearbox.


How do I know if my multipoint door lock is left or right handed?

99% of multipoint door locks are field reversible, instructions for which are under product information. For those models which are handed please refer to the handing chart to determine which hand you require.


Do you stock a gearbox only for this lock?

No gearboxes are not available for this lock.

All product options

All product options
Product Code Backset Spindle Faceplate StockRRPDiscountPriceQuantity
AGB2H3R30
30mm
Single 8mm
Flat 16mm - Square Ends
---
--,--
--
AGB2H3R35
35mm
Single 8mm
Flat 16mm - Square Ends
---
--,--
--